Varley and Gulliver - Gallery of Products


                                                     

                                          










VGSN 800


The VGSN 800 is a vehicular / pedestrian parapet. The system consists of Vertical Infill bars between horizontal rail sections located to supporting posts.


Galvanised finish to BS EN ISO 1461 provides corrosion resistance, however an additional protective/aesthetic painted finish can be applied if required.




VGAN Series Aluminium Parapet


The VGAN series aluminium parapet is a modular system. The system consists of 3,4 or 5 horizontal extruded aluminium rail sections located to supporting posts at heights specified on system drawings. It weathers to a dull grey finish, and is highly resistance to corrosion, like all our aluminium systems once erected it requires no maintenance therefore providing lower whole life costs as it has an almost unlimited life expectancy.

VGSN Series Steel Parapet


The VGSN 500 series parapet is a modular system. The system consists of 3,4 or 5 horizontal rail sections located to supporting posts at heights specified on system drawings.


Galvanised finish to BS EN ISO 1461 provides corrosion resistance, however an additional protective/aesthetic painted finish can be applied if required.

PRODUCTS COMPANIES Vehicle Restraint Systems Wire Rope Safety Fence Variable Message Signs Traffic Data Collection Car Park Barrier Systems Temporary Car Parking Lighting Columns Steel & Metalwork Solutions Structured Engineering Solutions Water Management Solutions Bridge Parapets & Passive Safety Solutions Steel Barrier Systems Highway Safety Systems Infrastructure Products

VGSN 800

Material: Steel

Containment: N1

Working Width: W2

Impact Severity: A

System Height: 1000 - 1400mm

Post Centres: 3.75m

VGAN 500 / 1000


Material: Aluminium

Containment: N1 / N2

Working Width: W2

Impact Severity: A

System Height: 1000 - 1800mm

Post Centres: 4m

VGSN 500 / 1000


Material: Steel

Containment: N1 / N2

Working Width: W1

Impact Severity: A

System Height: 1000 - 1800mm

Post Centres: 3.66m

VGAN 300


The VGAN 300 series aluminium parapet is a modular system, tested the the American Standard NCHRP 350. The system consists of 3 horizontal extruded aluminium rail sections located to supporting posts at heights specified on system drawings. It weathers to a dull grey finish, and is highly resistant to corrosion. Like all our aluminium systems once erected it requires no maintenance therefore providing lower whole life costs as it has an almost unlimited life expectancy.

VGAN 300


Material: Aluminium

Containment: TL3 / TL4

System Height: 1070mm

Post Centres: 2.44m

“HiMast”


Material: Aluminium

Category: 100 NE 2

Section Size: 125² - 252²

Unfactored Bending Capacity: 11.7 - 64kNm

Unfactored Torsional Capacity: 13.6 - 25.6kNm

“HiMast” Passive Sign Support


Statistics show serious injuries and deaths are occurring each year from collisions with non-passive sign post supports. In 2004 the UK Highways Agency introduced TA89/04 Use of Passively Safe Supports for Signs to allow an alternative to the traditional structural steel poles and protective safety barrier. TA89/05 also introduced a size limit for steel sign supports of 89mm dia. with a wall thickness of 3.2mm thick to set a size limit that could be placed on the highway without the protection of barrier unless passively safe.


Following more than two years of development Varley and Gulliver successfully completed the approval of single and multi-legged passive post designs to EN 12767 at MIRA test facility in the UK.

Privacy Policy

Bridge Parapets & Passive Safety Solutions

> View Profile